SP
Three-screw stainless steel screw press for sludge dewatering in an industrial hall
Troubleshooting

Screen Clogging / Blinding

Drainage gaps blocked, filtrate falling

When the ring screen blinds, water can no longer drain freely, cake solids fall and wash-water demand rises. Although the ring action is self-cleaning, greasy, scaling or very fine solids can still gradually block the gaps.

The symptom

When the ring screen blinds, water can no longer drain freely, cake solids fall and wash-water demand rises. Although the ring action is self-cleaning, greasy, scaling or very fine solids can still gradually block the gaps.

Causes and corrective actions

Possible causeCorrective action
Wash cycle too infrequentIncrease wash frequency for the sludge type.
Grease or oil coating the ringsDeep clean with a suitable degreasing agent.
Mineral scalingDescale with a mild acid suited to the deposit.
Wash nozzles blockedClean or replace nozzles; check wash-water quality.
Three-screw sludge dewatering machine with geared motors and sludge cake discharge
RF Series Screw Press

Three-Screw Dewatering Machine

Individually driven screws at low speed — quiet, energy-efficient and easy to maintain.

Explore the RF series
Engineering Assessment

Ready to Find the Right Screw Press?

Our engineering team provides application-specific screw press sizing and selection — based on your sludge type, flow rate, and dewatering targets.